EXTRA 5% OFF SUMMER SALE*
USE CODE 'SUM5' IN THE SHOPPING CART TO APPLY YOUR DISCOUNT
OFFER RUNS UNTIL 1st SEPTEMBER 2026
*Minimum spend £100, online orders only
BAL/IMPEY 500ml APD ACRYLIC PRIMER for WALLS & FLOORS, WGPR (P2G)
IMPEY/BAL 500ml APD ACRYLIC PRIMER for WALLS & FLOORS, WGPR (P2G)
To suit the Impey Waterguard wetroom waterproofing range.
BAL Prime APD is a rapid-drying acrylic primer suitable for priming wall and floor backgrounds prior to the fixing of ceramics, mosiacs and natural stone tiles in dry or wet interior and exterior environments. BAL Prime APD stabalises dusty surfaces and reduces the porosity of backgrounds and may be used undiluted on plaster walls and plasterboard, tongue and groove floorboards and anhydrite screed floors. Use diluted on plaster walls (if dusty or porous) and cement floors.
BAL Prime APD helps stabilise backgrounds prior to tiling in ultra-quick time, allowing for tiles to be fixed with a suitable adhesive in 15-30 minute and producing significant cost and time savings for your project. BAL Prime APD is suitable for a variety of projects including walls and floors, worktops, showers, heated screeds and areas with some movement or vibration.
USE FOR:
- preparing floor and wall backgrounds prior to fixing of ceramic/mosaic and natural stone tiles
- dry/wet – interior/exterior
USE UNDILUTED ON:
- plaster walls/plasterboard when using a BAL cementitious powder adhesive
- tongue & groove floorboards
- anhydrite screed floors
USE DILUTED 1:1 with clean water on:
- dusty/porous plaster walls when using a BAL ready-mixed adhesive
- cement: sand screed/concrete floors
MAY BE TILED AFTER: 30 minutes
Watertight Lifetime GUARANTEE
Impey Waterguard is the next generation of wetroom waterproofing systems. It provides a faster and easier method of tanking a leak-free wet floor area.
