EXTRA 5% OFF SUMMER SALE*
USE CODE 'SUM5' IN THE SHOPPING CART TO APPLY YOUR DISCOUNT
OFFER RUNS UNTIL 1st SEPTEMBER 2026
*Minimum spend £100, online orders only
VECTAIRE/CATA X-MART STAINLESS STEEL STANDARD 15cm BATHROOM/KITCHEN EXTRACTOR FAN FIXED GRILLE XM15SS
VECTAIRE/CATA X-MART STAINLESS STEEL STANDARD 15cm BATHROOM/KITCHEN EXTRACTOR FAN FIXED GRILLE, XM15SS
Typical specification
The fan is to be suitable for installation either into ceiling, wall or window (with the appropriate accessories), and be complete with an integral, adjustable, dynamic humidistat and an integral adjustable timer. There should be a neon on the front of the fan to indicate when it is operation. The fan casing should be made of shockproof and heat resiistat plastic, contain a motor with sealed, self-lubricating bearings, and be protected with a thermal cut-out.
The fan should be double insulated and be suitable for installation into Zones I and II.
The fan is to be CE marked and comply with current EC Low Voltage Directive EMC89.336 and with BSEN60529. The fan should comply with Building Regulations requirements for installation into a bathroom or shower room.
- Deluxe low profile axial fans
- Stainless steel or white
- 18 models
- IPX4 Splashproof
- 3 sizes for toilets, shower-rooms, bathrooms, utility rooms and kitchens
- For walls, ceilings or windows (with window kit)
- Standard, timer and humidity control
- Exceeds Building Regulations requirements (including new Document F)
- axial fans to exhaust air and fumes directly outside or through short lengths of ducting
- 6"/150mm ducting outlet
- new, technically innovative, to complement modern decor
- indicator light to show when operating
- front easily removed (no screws) for cleaning
- quick fit installation system for walls
- easy plasterboard ceiling installation with (optional) ceiling ring
- window installation requires window kit
- protection against backdraughts
- quiet operation
- IPX4 Splashproof - can safely be installed in Zones I and II
- casings from shockproof and heat resistant plastics
- double insulated motors of shaded pole type mounted on self-lubricating, sealed ball bearings for long life
- motors fitted with thermal safety cut-out
- maximum ambient temperature - 40°C
- EN60335-2-80
- EC Low Voltage Directive 73/23-93/68
- EC Directive EMC98/336
- CE marked
- XM10,12,15 - standard
- XM10T, 12T, 15T - with overrun timer
- XM10H, 12H, 15H - with humidity control and timer
- XM10SS, 12SS, 15SS - standard
- XM10TSS, 12TSS, 15TSS - with overrun timer
- XM10HSS, 12HSS, 15HSS - with humidity control and timer
General
Specification
Compliance
Range
WHITE
STAINLESS STEEL
